| User Benefits you can rely on- |
| -Rapid start up - from cold start
to full load in five minutes |
-Easy access to burners - end mounted
burner is simple to maintain. |
| -High quality steam - guaranteed
99% + dry steam. |
-Low cost coil replacement - multiple
coil design permits replacement of only the damaged coil. |
| -Minimal soot problems - separate
combustion chamber prevents coating coils with partially burned
fuels. |
-Minimum prepurge energy loss - smaller
size unit allows proper prepurge in seconds. |
| -Low fuel requirements - air preheating
and refractory lined chamber for complete combustion. |
-Simplified fuel switching - only
have to turn selector, no burner changes required. |
| -Quick response to load changes -
cycle time of less than one minute. |
-Minimum off-on cycling - turndown
ratios up to 10 to 1 for handling wide range of loads. |
| -Complete line - nine sizes to permit
proper selection for any application. |
-Low installation costs - packaged,
compact units require only 60% of floor space needed for firetube
boilers |
| -Long life with minimum maintenance
- coil design pressure of 1000 psig result in thicker coil walls
for longer life. |
-Easy installation skid mounted assembly
including control console. |
| -Optimum efficiency at any load -
full modulation of water, air, fuel and output. |
-Maximum safety - steam drum located
outside of firing zone. |
